_edited_edited_edited_edite.png)
PROCESS
PROCESS
Grout Process 25
Kitchen Floor Process
Epoxy D.I.Y Simple Process Grouting
Timelapse Grout Service
Indoor Grout
Grout ProTech Singapore carries Epoxy grout which is a two-component epoxy resin-based product.
The grout is made of imported raw materials from Japan and the United States. It has high-strength chemical and mechanical properties, such as extreme adhesion strength and hardness.
Our tile grout is also dirt/mildew/mold/fungus resistant, easy to clean, strong-bonding, and highly durable. Non-toxic and environmentally friendly.
These products have passed the French A+ standards and the EU CE / ROHS test standards.
Application
1. Use grout tools to clear old grouting and buffer tile gap
2. Ensure a clean environment before epoxy application, including multiple vacuum and wiping.
*Existing debris will affect durability and finishing
3. Use grout wax to coat tiles beside the grout line
4. Install the customized nozzle on the grout tube
Install the grout tube on the epoxy-chalk gun (2 tubes)
5. Cut out a small opening on the tip of the nozzle
6. Before application, extrude and discard 20-30cm of the grout to evenly mix
7. Apply grouting to the tile joint evenly with an angle of 45 degrees downward to fill the tile gap
8. Use a special pressure steel ball or tungsten steel piece to scrape the epoxy. Use corner pressing tools for external corners
9. Shovel the excess grout after 4 to 8 hours of curing.
10. Clean up and examine grout finishing. Repeat Step 2-8 for touch-up and better leveling
*Discard the epoxy bottle after 12 hours after open. Do not reuse.
* ALL TILE GROUT LINES MUST HAVE A CEMENT BASE BEFORE APPLICATION. DO NOT USE EMPTY GROUT LINE FOR EPOXY GROUT APPLICATION; 80% RISK OF PEELING AFTER.
Recommendation & Dosage reference
Various bright and matte brick, wood grain brick, antique brick, glazed tile, natural stone, artificial marble, ceramics, and other joint filling and beauty joints.
The theoretical amount of grout depends on the tile specification, gap width, depth, and construction habits.
The following values are the construction area (unit: square meter) of one piece tile grout, which is for reference only.
